Finish Pro Model FP-2560

Dry Line Graining/Deburring/Finishing machine. This equipment is available as follows:

Standard Features:

  • Motorized Table Lift, with digital readout
  • Variable Speed Conveyor
  • Conveyor Forward & Reverse
  • Belt Safety Overtravel Switches
  • Electronic Eye Belt Tracking. Belt tracking adjusting lever ( Belt Trimmer ) to

Re-adjust the tracking system when running extremely out of parallel belts

  • 4-Jackscrew Table Support
  • Double Infeed & Outfeed Pinch Rolls with protective guards
  • Conveyor Belt Tracking System
  • Safety System with Disc Brake. Air operated disc brakes to stop sanding head in

3-5 seconds in the even of loss of air pressure or activation of any emergency stop device

  • Table Height Digital Readout
  • Load Meter indicates percentage of full motor loads
  • Belt change door electrically interlocked for safety purpose
  • Air tensioning of belt for accurate tensioning & compensation of belt stretch
  • Quick release sanding head support for fast belt change
  • Dust collection hood with 4” outlet is located adjacent to abrasive head in sanding area
  • Emergency stops from almost any point
  • Noise level bellows 80 dba
  • Operation manual, control tags, danger signs, and warning labels in English on machine
  • 208/230, 3-Phase
  • One year Industrial Warranty for parts
  • We strongly recommend to use good dust collector for our Finish Pro, otherwise, the warranty will be void.

NOTE

  • Prices are for 208-230 VOLTS
  • Total amps 45 @ 230/3/60
  • COMPRESSED AIR REQUIRED:  2 CFM @ 90 PSI

 

CAUTION: If fire hazardous materials, such as aluminum, titanium, magnesium, etc., are to be processed, a dust collection system that conforms to National Fire Protection Association (NFPA) should be used.

OPTIONAL:  WET DUST COLLECTORS use a water filled tank through which all grinding dust is pulled by a motor driven impeller fan.  Particles sink to the base of the tank where they can easily be removed by raking into a provided container.  Normal tap water is used, there are not filter bags to be changed.   Water level is automatically controlled when unit is connected to a water supply.  All units are equipped with explosion relief door and sound silencer.

 

Specifications:        Model  FP-2560
Max. Part Width                   24”
Abrasive Belt Size               25” x 60”
Contact Roller Size               8” Dia.
Passline Height              31” – 37”
Max. Thickness Capacity               6-1/8”
Conveyor Drive Speeds             8-40 FPM
Infeed Conveyor Length                    20”
Dust Collector Capacity             1,100 CFM
Main Motor          10 HP, 230V , 3-Ph
Conveyor Motor          1 HP, 230V ,  3-Ph
Table Lifting Motor           1 HP, 230V,  3-Ph
Net Weight, approx.            2,950 LBS
Machine Dimensions, LxWxH            55” x 63” x 69”

Finish Pro Model FP-2560, 6-1/8” opening

OPTIONAL ACCESSORIES

Model WDC-FP40 Wet Dust Collector # WDC-FP40, 5 HP, 2,100CFM

( it is demo wet collector, all stainless steel )

Heavy Duty Ducting Package # HDDP-2560

Service Engineer for Start-Up and On-site Training for # ST

NOTE: All prices in this quotation are plus tax, F.O.B. Factory. Prices and specifications are subject to change without notice

Model # FP-2560 , dry, single head