Finish Pro Model FP-4075

Dry Type Line Graining/Deburring/Finishing machine. This equipment is available as follows:

 Standard Features:

  • Abrasive belt size: 40” x 75”
  • Motorized Table Lift with computer display
  • Variable Speed Conveyor
  • Conveyor Forward & Reverse
  • Belt Safety Overtravel Switches
  • Electronic Eye Belt Tracking. Belt tracking adjusting lever ( Belt Trimmer ) to

Re-adjust the tracking system when running extremely out of parallel belts

  • 4-Jackscrew Table Support
  • Double Infeed & Outfeed Pinch Rolls with protective guards
  • Conveyor Belt Tracking System
  • Safety System with Disc Brake. Air operated disc brakes to stop sanding head in

3-5 seconds in the even of loss of air pressure or activation of any emergency stop device

  • Table Height Digital Readout
  • Load Meter indicates percentage of full motor loads
  • Belt change door electrically interlocked for safety purpose
  • Air tensioning of belt for accurate tensioning & compensation of belt stretch
  • Quick release sanding head support for fast belt change
  • Dust collection hood with 6” outlet is located adjacent to abrasive head in sanding area
  • Emergency stops from almost any point
  • Noise level bellows 82 dba
  • Operation manual, control tags, danger signs, and warning labels in English on machine
  • 208/230V, 3-Phase
  • One year Industrial Warranty for parts

NOTE

  • Prices are for 208-230 VOLTS
  • Total amps 60 @ 230/3/60
  • COMPRESSED AIR REQUIRED:  2 CFM @ 90 PSI

 

CAUTION:  If fire hazardous materials, such as aluminum, titanium, magnesium, etc., are to be processed, a dust collection system that conforms to National Fire Protection Association (NFPA) should be used.

 

OPTIONAL:  WET DUST COLLECTORS use a water filled tank through which all grinding dust is pulled by a motor driven impeller fan.  Particles sink to the base of the tank where they can easily be removed by raking into a provided container.  Normal tap water is used, there are not filter bags to be changed.   Water level is automatically controlled when unit is connected to a water supply.  All units are equipped with explosion relief door and sound silencer.

 

Specifications:          Model  FP-4075
Max. Part Width               40”
Abrasive Belt Size                    40”  x  75”
Contact Roller Size           8” Dia.
Passline Height         31” – 37”
Max. Thickness Capacity            6-1/8”
Conveyor Drive Speeds        8-40 FPM
Infeed Conveyor Length              20”
Dust Collector Capacity        1,800 CFM
Main Motor        15 HP, 230V / 460V, 3-Ph
Conveyor Motor        1.5 HP, 230V / 460V,3-Ph
Table Lifting Motor         1 HP, 230V / 460V, 3-Ph
Net Weight, approx.          4,650 LBS
Machine Dimensions, LxWxH            76” x 88” x 81”

Finish Pro Model FP-4075 with 6-1/8” table opening

OPTIONAL ACCESSORIES

 

Model WDC-FP40 Wet Dust Collector # WDC-FP40, 2100CFM,5HP

Heavy Duty Ducting Package # HDDP-FP40

Service Engineer for Start-Up and On-site Training  # ST,Plus travel expenses

Shipping (approx.)

NOTE: All prices in this quotation are plus tax, F.O.B. Factory. Prices and specifications are subject to change without notice

Model # FP-4075, 40” wide