HIGH PRECISION GAP BED LATHES

Made in Taiwan

ISO  9001

Model # GML-1743T, 17 x 43”

Model # GML-1767T, 17 x 67”

Model # GML-1780T, 17 x 80”

Standard Features:

  • ISO 9001 certified
  • Made in Taiwan
  • One-piece cast iron base
  • Large spindle bore 2-1/4”
  • Heavy Duty spindle D1-6
  • Heavy Duty main motor 7-1/2 HP
  • 12 spindle speeds from 35 to 2,000 rpm
  • 44 kinds of inch threads, and 39 kinds of metric threads
  • Threading and feeding rate change without changing gears
  • Spindle is balanced, hardened and precision ground
  • Spindle is supported at 3-point by high precision bearings
  • All gears and shafts are hardened and precision ground
  • Guideways induction hardened and precision ground
  • Automatic lubrication system in headstock and feed box
  • Hand oil pump on apron for all guide ways lubricatuion
  • Power source: 220V/208V, 3 phase ( 440V/460V is optional )
  • One year industrial warranty for parts
Specifications: GML-1743T    GML-1767T   GML-1780T
Max. swing over bed        17”                   17”                   17”
Max. length of workpiece        43”                      67”                     80”
Max. swing over cross slide     10-3/4”              10-3/4”            10-3/4”
Max. Swing in gap        24”                     24”                     24”
Width of Bed                                    12”
Spindle bore                              2-1/4”, D1-6
Taper of spindle center                                    M.T.# 4
Spindle speeds                             35-2,000rpm / 12 steps
Longitudinal feeds                          0.0012-0.034 IPR, 36 kinds
Cross feeds                          0.0006-0.017 IPR, 36 kinds
Inch threads                                72 – 2  TPI, 44 kinds
Metric threads                               0.2 – 14 mm , 39 kinds
Max. travel of top slide                                       4-3/4”
Max. travel of cross slide                                           9”
Diameter of tailstock quill                                         2-3/8”
Max. travel of tailstock quill                                            6”
Taper of quill center                                       M.T. # 4
Main motor         7-1/2 HP, 220V or 440V, 3 phase, prewired on 220V
Coolant pump motor             1/8 HP, 220V or 440V, 3 phase, prewired on 220V
Machine weight, approx.   3,950 LBS         4,650 LBS       5,350  LBS
Overall dimensions, inch    91x42x59          115x42x59      127x42x59

Specifications are subject to change without prior notice

Shown model # GML-1767T

Standard Equipment:  

  • 9” 3-jaw chuck * 12” 4-jaw chuck       * 14” Face plate        *   1”-6” steady rest
  • Follow rest * Removeable gap       *  4-way tools post    *   Foot brake
  • Halogen light      * Full coolant system  *Thread chasing dial  * Carriage stop system
  • Tool box with tools * Operation manual *  Parts manual         * Splash guard

Optional Equipment:

  • Taper turning attachment # TA-1767T
  • 2” to 7-1/2” steady rest # SR-7-1767T
  • 12” 3-jaw chuck # 3J-12-D1-6
  • NEWALL DRO C80 # NW-1743T
  • NEWALL DRO C80 # NW-1767T
  • NEWALL DRO C80 # NW-1780T